5040
FLOW DIAL GAUGE
 |
 |
 |
 |
|
For use with differential pressure devices such as orifice plates or pitot tubes to measure liquid or higher pressure gas flows in pipes. A selection of gauges is available to cover most flow ranges. Dial diameter is 150mm and panel or wall mounted versions are available. The gauge can be used as a direct alternative to a manometer flow indicator in applications where for some reason a liquid column or mercury column manometer is considered inappropriate. |
 |
| All units of flow (m3/hr, l/mm etc.) can be specified. The flow gauge can be supplied together with an orifice plate to give a complete flow metering system. Alternatively, given information on the maximum flow and corresponding differential pressure, Poddymeter will specify a suitable gauge for connection to an existing orifice plate or pitot tube of other manufacture. | |
|
SPECIFICATION
|
|
|
Accuracy
|
±2% Full scale deflection (D.P.) |
|
Max. Line Pressure
|
30 bar (depending on gauge model) |
|
Overload
|
7 bar (depending on gauge model) |
|
Wetted Parts
|
Brass as standard Stainless steel on request |
|
Max. Temperature
|
80° C |
|
Bleed valves on units used for liquid flow enable
air to be bled from the system.
|
|
|
Nominal Size
|
150 mm |
|
Depth
|
71 mm |
|
Bezel O.D.
|
184 mm |
|
Panel cut-out
|
165 mm |
design by:
Poddymeter Limited
Unit 2, Park Works, Borough Road, Kingston upon Thames, Surrey KT2 6BD, United Kingdom
Tel: 020 8546 9311 Fax: 020 8547 2325 www.poddymeter.co.uk E-MAIL:
Unit 2, Park Works, Borough Road, Kingston upon Thames, Surrey KT2 6BD, United Kingdom
Tel: 020 8546 9311 Fax: 020 8547 2325 www.poddymeter.co.uk E-MAIL:
15-sep-05
Copyright © 2005 PODDYMETER LTD