INCLINED PRECISION MANOMETERS
 
 
 
 











Click for printer friendly version

For the sensitive measurement of:

  • Low Pressure
  • Vacuum
  • Differential Pressure

Ranges:
0- 1.5mBAR upto
0-28mBAR

  • Tough, clear acrylic block
  • No parallax error
  • Scale adjustable for zero

Static Pressure Ratings:

  • Standard 7 bar
  • High Pressure 35 bar
A comprehensive range of inclined  manometers manufactured from clear, stable and tough acrylic block. Precision machined reservoirs and indicating columns ensure high accuracy. All manometers have overpressure chambers to inhibit fluid loss. Portable versions have trap tubes which allows the instrument to be transported without spillage of the indicating fluid.
Zeroing is easy using the sliding scale. Direct reading scales take into account changes in reservoir fluid level without the need for further adjustment. All instruments are suitable for the measurement of pressure, vacuum or differential pressure of air or gas.
The built-in spirit level is factory preset so that in use the manometer can quickly and accurately be set to the correct angle of inclination.
In addition to the standard instruments listed we produce special units to solve specific problems. For manometers used in conjunction with D.P devices, direct reading flow scales can be supplied. Carrying cases are available for portable versions.
Traceable certification to national standards via UKAS calibrated master manometers can be supplied.
RANGES
Resolution Shown in ( )
Scale Range
Liquid filled S.G. 1.00 Blue
Model
Slope
Approx.  Scale length
      
    mm  in.  ins. Wg  mm wg   mbar
T1 1 in 5 180  7 0 - 1.5 ( 0.01 )  0 – 37 (0.2 )  0 – 3.7 (0.05 )
T2 1 in 3 180 7  0 – 2.5 (0.02 ) 0 – 60 (0.5 ) 0 – 6.0  ( 0.05 )
T3 1 in 3 450  17 0 – 6  (0.02 ) 0 – 150 ( 0.5 ) 0 – 15   ( 0.05 )
Oil filled S.G. 0.8 Red
T4 1 in 10 180 7 0 – 0.6 (0.005 ) 0 – 15 (0.1 ) 0 – 1.5 (0.01 )
T5 1 in 5 180 7 0 – 1.2 (0.01 ) 0 – 30 (0.2 ) 0 – 3.0 (0.02 )
T6 1 in 3 180 7 0 – 2    (0.02 ) 0 – 50 ( 0.5 ) 0 – 5.0 (0.05 )
T7 1 in 3 450 17 0 – 4.8 (0.02 ) 0 – 120 (0.5 ) 0 – 12.0 (0.05 )
T7L 1 in 20 450 17 0 – 1.5 (0.005 ) 0 – 37  (0.1 ) 0 – 3.7  (0.01 )
Fluid filled S.G.1.88 Blue
T8 1 in 5 180 7 0 – 3     (0.02 ) 0 – 80   (0.5 ) 0 – 8   (0.05 )
T9 1 in 3 180 7 0 – 4.75 (0.05 ) 0 – 120 (1.0 ) 0 – 12  (0.1 )
T10 1 in 3 450  17 0 – 11    (0.05 ) 0 – 280  (1.0 ) 0 – 28  (0.1 )

                           

General Information

Dimensions

180 mm Scale Length models:          263 mm x 110 mm
450 mm Scale Length models:          507 mm x 150 mm
Standard Thickness:                             25 mm
High Pressure Thickness:                   50 mm

MANOMETERS are fitted as standard with nozzles for 6 mm bore flexible tubing. Other connectors are available on request.

INDICATING LIQUIDS:

Red Oil free flowing paraffin based non – freezing, usable –5 deg C to + 40 deg C
Blue Water distilled with additives to improve flow.
INERT S.G.1.88 free flowing but more affected by temperature changes. Usable – 20 deg C to + 40 deg. C

SCALES in other units are available to special order.

Click for printer friendly version
website
design by:
Poddymeter Limited
Unit 2, Park Works, Borough Road, Kingston upon Thames, Surrey KT2 6BD, United Kingdom
Tel: 020 8546 9311 Fax: 020 8547 2325 www.poddymeter.co.uk E-MAIL:
Last Updated:
9-mar-12

Copyright © 2005-12 PODDYMETER LTD