PODDYMETER
PODDYMETER

2000WF Swimming Pool Flow Meter Transmitter

Digital flow indicator & transmitter for monitoring of water flow rates through differential pressure flow meters

  • Rugged Transducer arrangement - up to
    10 Bar line & overpressure.
  • Damped steady readings
  • Dedicated factory set up for each D.P.
    flowmeter
  • No onsite calibration/set up required.
  • Simple to install
  • 4 – 20 mA output
  • Calibration certificate
  • Retro fit to existing D.P. flowmeter or a complete new orifice/transmitter flow meter system

     

 

       £685.00 each  Excl. VAT  

       (Without Orifice Plate)

                                                                              

 The Series 2000WF flow transmitter displays the flow rate from a primary differential pressure device e.g. orifice plate, venturi, averaging pitot tube etc.
Compressed gas or liquid flows in any size of pipe up to 500mm dia. can be measured. The unit consists of a surface mounted indicator housing, linked by a shielded cable to an external transducer block, connected to the tapping points of the primary device. The differential pressure output measurement is converted with electronic square root extraction to a linear flow reading and output, factory set to the D.P. device specified (Poddymeter supplied device or other). The series 2000WF is accurate and highly reliable. Providing the pressure does not exceed 10 Bar no damage can be incurred by the transducer arrangement from line pressure or one side overpressure.

Complete Orifice/2000WF Systems

Nominal Pipesize

FAW/2000WF/V
(Orifice+2000WFSystem)

Inches

mm

Price (£) Excl. VAT

0.5 - 1.5

12 - 37

865.00

2 - 3

50 - 75

890.00

4

100

925.00

5 - 6

125 - 150

953.00

7 - 8

175 - 200

985.00

10

250

1033.00

12

300

1108.00

12+

 300+

 P.O.A.

Typical uses are for the measurement of water flow in pipes in conjunction with orifice plates, pitot tubes and other D.P. devices. The most common application is swimming pool flow metering.

The device may also be used for monitoring compressed gas flows up to 10 BAR line pressure.



When ordering please state: pipe size (ID), flange table (e.g. PN16 etc.) type

and specific gravity of liquid or gas flowing, normal maximum flow,

temperature and pressure, the indicator (if required e.g 2000WF) and the

D.P range.

Please call us if you have any queries.

Specifications

Input

24 volt D.C. - 
 
650mA mains adaptor supplied

Output

4 – 20 mA (max 500 ohms) linear with flow

D.P. range

Minimum 0 – 30 mBAR 
 
maximum 0 – 2000 mBAR

Display

3 ½ digit LCD 
 
50 x 20 mm

Flow range

Anything within limits of 3 ½ digit display, 6 : 1
  turndown

Accuracy

+/- 0.5% FSD flow (typical)

Temp. range

0 – 50 deg C at transducer block. (higher in systems
  with longer tubing)

Wetted parts

Stainless Steel transducer. Acetal block, nitrile
  O-rings,

Size

Indicator Box: 125 x 125 x 80 mm; Transducer block:
  150 x 75 x 75max

Mounting

Box & Transducer block come with screw fixing
  holes.

Lead length

1.5 metre lead between box and block as standard.

Block ports

¼ BSP – normally fitted with 6mm od nylon tube fittings