PODDYMETER
PODDYMETER

Series 2000GF Flow Transmitter

These items are not yet available in the online store. Please call or email for details on ordering.

Digital flow indicator & transmitter for monitoring of low pressure gas flow rates through differential pressure flowmeters

Air Flow Meter Transmitter
  • Internal Transducer arrangement 
  • Damped steady readings
  • Dedicated factory set up for each D.P.
    flow meter
  • No onsite calibration/set up required.
  • Simple to install
  • 4 – 20 mA output
  • Calibration certificate
  • Retro fit to existing D.P. flowmeter or as complete new orifice/transmitter flowmeter system 

 

£615.00 each Excl. VAT

                                                                              (without Orifice Plate)

The Series 2000GF flow transmitter displays the flow rate from a primary differential pressure device e.g. orifice plate, venturi, averaging pitot tube etc.
Low pressure gas flows in any size of pipe up to 500mm dia. can be measured. The unit consists of a surface mounted indicator housing with internal transducer arrangement connected to the tapping points of the primary device. The differential pressure output measurement is converted with electronic square root extraction to a linear flow reading and output, factory set to the D.P. device specified (Poddymeter supplied device or other). The series 2000GF is accurate and highly reliable for measuring gas flows where the static line pressure is 50 mBAR or less.

Complete Orifice/2000GF Systems

 

Nominal Pipesize

FAW/2000GF/V
(Orifice+2000GFSystem)

Inches

mm

Price (£) Excl. VAT

1 - 2

25 - 50

829.00

3

75

859.00

4

100

901.00

5 - 6

125 - 150

935.00

7 - 8

175 - 200

975.00

10

250

1033.00

12

300

1125.00

12+

300+

P.O.A.

Typical uses are for the measurement of fan or blower driven air in pipes or ducts in conjunction with orifice plates, pitot tubes and other D.P. devices. Ideal for applications where the line pressure is 50 mBAR or less.



When ordering please state: pipe size (ID), flange table (e.g. PN16 etc.) type

and specific gravity of liquid or gas flowing, normal maximum flow,

temperature and pressure, the indicator (if required e.g 2000WF) and the

D.P range.

Please call us if you have any queries.

Specifications

Input

24 volt D.C. - 
  650mA mains adaptor supplied

Output

4 – 20 mA (max 500 ohms) linear with flow

D.P. range

Minimum 0 – 2 mBAR 
  maximum 0 – 50 mBAR

Display

3 ½ digit LCD 
  50 x 20 mm

Flow range

Anything within limits of 3 ½ digit display, 6 : 1
  turndown

Accuracy

+/- 0.5% FSD flow (typical)

Temp. range

0 – 40 deg C at transducer. (higher in systems
  with longer tubing)

Size

Indicator Box: 125 x 125 x 80 mm

Mounting

Box & Transducer block come with screw fixing
  holes.

Ports

1/8 BSP – normally fitted with 6mm od nylon tube fittings