PODDYMETER
PODDYMETER

6200MF Hydronic Manometer

Digital Water Flow Test Set for measurement of Flow, Differential Pressure and Static Pressure

 

Unit Price (Excl. VAT): £1060.00

 

 

  • Differential and line pressure in KPa

  • Flow in L/Sec with KVs input

  • Rugged transducer arrangement

  • Sealed unit – water resistant

  • Damped steady readings

  • Overpressure warning 

  • Low Battery warning

  • Hanging strap provided

  • Quick Release Tubing with Valves & Binder Adaptor Pair Included

  • Foam lined case for instrument, tubing & adaptor storage

  • Tap adaptor included

  • Calibration certificate

  • Simple operation

  • Back light

          Suitable for Flow and Differential Pressure measurement across balancing

          valves, orifice plates,Pitot tubes etc. in waterflow systems.

          Flow rate can be displayed by inputting individual KVs values.

          In ‘Flow’ mode, both flow(in L/Sec) and DP (in KPa) are displayed.

          In ‘Pressure mode’ line pressure (in KPa) and DP (in KPa) are both displayed.

 

          All units are leak tested to 10 Bar and calibrated before despatch. The unit

          comes complete with a calibration certificate, pair of binder adaptors, nylon

          tubing valve/quick release adaptor sets, and a foam lined carry case for

          storage.

          The instrument is also supplied with a detachable strap for hanging in

          awkward areas or around neck.

          Simple to use, just connect, flush, turn on, zero, and read. Providing the line

          pressure does not exceed 10 Bar, no damage can be incurred by the

          transducer arrangement if one side only is accidentally pressurised. If the

          static pressure is exceeded, a warning message is displayed. The 6200MF has

          quick release connections with robust valves fitted to the tube for easy

          storage. The casing is sealed for resistance against water/moisture ingress.

 

          Recommended for hot water systems: A tap adaptor accessory for cold water

          priming is available.

 

Spares tubing & valves for our digital waterflow manometers and the tap adaptor for cold water priming can be found on our commissioning accessories page, along with other commissioning spares such as Binder & Mechseal adaptors.

Specification

 (Range:

Line pressure             : 0 – 1000 KPa

                                      Resolution 1 Kpa

Differential pressure : 0 – 100.00 KPa

                                  Resolution 0.01 Kpa

Flow                            :  4 digits in L/Sec

                              (floating decimal point)

KVs input range         : 0.5 - 2500

Max Line Pressure     : 10 BAR G

Accuracy:

0 – 20 KPa  : +/- 0.1 KPa

Over 20 KPa +/- 0.2 KPa or 0.5% whichever is greater

Batteries : 4 x AA (Supplied)

Battery Life : 100 hours approx

Transducer wetted parts : 316 stainless steel

Instrument Size & weight : 27.5 x 11 x 4 cm ; 750g

Cased Size & weight : 40 x 30 x 9 cm ; 2.4 KG

Calibration Period: 12 Months

Operating Temperature: 0 - 50 deg. C (at transducer)

6200MF stored in carry case with supplied binders. Tubing stored in lid compartment. Tap adaptor not shown

 

 

 

 

 Tap Adaptor - For cold water priming.

                        Recommended for use on                             hot water systems.

                        £18.00 each

 

 

 

 

 6000TVQ - Quick Release Connectors

                  & Valves with Tubing for

                  6000WFV-Q & 6200MF                                   (Red & Blue)

                   £60.00 per pair